Heat Shrink Busbar Insulation Tape

Product Introduction

Made from radiation cross-linked polyolefin. The dual layer structure of insulation/hot melt adhesive effectively provides electric insulation and shock protection to busbar up to 24KV. Widely used to protect irregular shape busbar or connectors where tube products can not be applied.

Inquiry now

product introduction

Features

1.4:1 shrink ratio
Eliminates air leakage in vacuum and ventilation systems
Seals against moisture ingress and other contaminants
Powerful adhesive bonds to galvanized steel, Aluminum and stainless steel
Effective, reproducible seal allows for resistance to bending, vibrations and other mechanical stresses over a wide range of temperatures
Application procedure is quick, simple and clean
Continuous operating temperature:-45℃- 125℃
Shrink temperature: 120℃
Color: Black, Red, Green, Yellow

Technical Properties

Property	Typical data	Property	Typical data
Tensile strength	≥11.8MPa	Volume resistance	≥1×1014Ω.cm
Tensile strength after aging	≥12MPa	Volume constant	3.5(max)
Elongation at break	≥550%	Copper corrosion	No corrosion
Elongation at break after aging	≥400%	Water absorption	＜0.5%
Dielectric strength	≥20KV/mm	Flammability	Self-extinguish in 60s

Dimension

Type	As supplied width(mm)	As supplied width(mm)wall Thickness	Length(m)
BT-10	10	1.2	5
BT-50	50	1.2	5

Note: Other size is available on request

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Heat Shrink Busbar Insulation Tape

Tags :

Related products

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

Heat shrink cable accessories 10-36KV

Cotran heat shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our heat shrink terminations offers reliable and consistent performance for longer service life. We have designed our heat shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36KV.

Heat shrink cable accessories 1KV

Cotran heat shrink terminations and joints are composed of a series of pre-expanded adhesive lined heat shrink tubes and necessary accessories. Heat shrink and provide excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC/PILC, S/C, multi-core cable rated to 0.6/1kV.

Wraparound Repair Sleeve

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.

Heat Shrink Rain Shed (10~36kV)

Applications：

Used to provide insulation protection for cable outdoor termination in order to increase the creepage distance and avoid the formation of sewage for various of rod supporting insulators.