Insulating Busbar Cover Protection up to 11 KV, 24KV, 36KV

Product Introduction

Made from specially formulated radiation cross-linked compounds. It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of busbar in switch and substation to safe protect up to safe protect up to 11 kv, 24kv, 36kv.

Inquiry now

product introduction

Technical Properties

Property	Typical data	Property	Typical data
Hardness	85(Shore A)	Flame retardant	VW-1
Tensile strength	≥12MPa	Dielectric strength	≥20KV/mm
Elongation at break after aging	≥300%	Volume resistance	≥1×1014Ω.cm
Water absorption	≤0.1	Operating temperature	-50~125℃

Type of Sample

Type	Busbar type	Note
BC-R-L 22	100×10/100×10	Red; "L "type; 100×10 double busbars lapping with 100×10 double busbars;
BC-Y-T 12	100×10/80×10	Yellow; "T " type; 100×10 single busbar bar lapping with 80×10 double busbars;
BC-G-I 11	120×10/120×10	Green;"I " type; 120×10 single busbar lapping with 120×10 single busbar;
BC-R-X 22	100×10/100×10	Red;"X" type;100×10 double busbars lapping with 100×10 double busbars.

Note: Other size is available on request，Because of various busbar joint combination forms, be sure to specify the busbar specifications and combination forms when ordering.

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Insulating Busbar Cover Protection up to 11 KV, 24KV, 36KV

Tags :

Related products

Heat Shrinkable Busbar Insulation Tube

Designed for insulation of copper and aluminum busbars- for electrical substations and switchgear cabinets. Can be used for exterior installations

Shrink ratio: 2.5:1

Operating voltage: 35 kV

Material: polyolefin, halogen-free «HF»

Analogs: BPTM (Raychem); BBI (3M)

Resistant to the phenomenon of tracking and UV radiation

High dielectric strength

Color: brick red

The use of tubes ТТШ allows shortening the distance between phase busbars and significantly reducing the dimensions of the device

Protects electrical busbars against chemical corrosion

Protects equipment from short circuits in case of contact of electrical devices with animals and birds

Heat shrink cable accessories 10-36KV

Cotran heat shrink terminations (indoor/outdoor) are precisely designed to meet the parameters of international cable and cable accessories standards such as CENELEC HD 629.1 S1, IEEE-48, IEEE-404, IEC60502. Our heat shrink terminations offers reliable and consistent performance for longer service life. We have designed our heat shrink terminations for single core and 3 cores extruded UA, SWA/STA, CWS/CTW cable through 36KV.

Heat shrink cable accessories 1KV

Cotran heat shrink terminations and joints are composed of a series of pre-expanded adhesive lined heat shrink tubes and necessary accessories. Heat shrink and provide excellent waterproof seal and electrical insulation. The terminations and joints are designed to be suitable for SWA/UA, XLPE/PVC/PILC, S/C, multi-core cable rated to 0.6/1kV.

Wraparound Repair Sleeve

Cotran wraparound repair sleeve (CWRS) is designed to repair damaged cable jackets and protect cable or pipes where needs corrosion protection on undamaged ones. CWRS is made from modified cross-linked polyolefin (XLPE) with a hot-melt adhesive. When heating, the sleeve shrinks and the adhesive melts, thereby achieving tightly bonding between the sleeve and the cable. It provides an excellent solution of protection against mechanical stress, harshest environments, moisture and corrosion.

CWRF is a fiber reinforced repair sleeve, which is composed of XLPE and fiber layer. It can provide better mechanical properties. CWRA is a fiber reinforced and aluminum layer reinforced repair sleeve, which is composed of XLPE, fiber layer, and aluminum layer. It can provide more stronger mechanical properties than CWRS and CWRF.

Heat Shrink Rain Shed (10~36kV)

Applications：

Used to provide insulation protection for cable outdoor termination in order to increase the creepage distance and avoid the formation of sewage for various of rod supporting insulators.